GQ-15 型工程钻机 GQ-15 ENGINEERING DRILLING MACHINE 1. 钻机适用范围
GQ-15型工程钻机是我厂为大口径基础工程施工所研制的新产品,结构新颖、轻便,可采用正反循环工艺钻进,适应于房屋、高层建筑、堤坝、港口码头、桥梁工程的基础灌注樁孔施工及大口径水井钻进。
2. 钻机主要特点:
◆扭矩大、与同类钻机相比重量较轻,体积也小,因此便于搬迁。 ◆采用龙门形结构、动力头上下移动的形式,强度大,刚性好。 ◆动力头通孔直径大(182×182mm),既可采用正循环钻进,如配备泵吸反循环设备。也可进行反循环钻进。 ◆本钻机强度大,并具有五档正转,一档反转,适用多种地层条件钻进,便于处理孔内事故。 ◆动力头配备手动卡盘用四方主动钻杆钻进,回次钻进深度大、效率高。 ◆动力头采用油缸直接给进,加压起拔能力大,加减压钻进方便。 ◆滑动底座行程为1150mm,让开口范围大,起下钻方便。 ◆备有步履机构,钻机移动、对准孔位方便。 ◆钻机布局合理,操纵方便、灵活、稳定性好。 ◆可配备专用钻塔,使用方便。 1. APPLICATIONS:
GQ-15 engineering drilling machine is newly designed special for large diameter pile hole drilling, can use forward-circulation and reverse circulation drilling methods mainly used in drilling large diameter pile for building, skyscraper, dam, harbor, bridge etc. and drilling large diameter well.
2. FEATURES:
◆Big torque, lightweight and compact structure in compare with same kind machine. ◆Mast, top-drive head move down or up along with, strength and rigidity. ◆Top-drive head has large inner diameter (182×182mm). ◆Reverse-circulation drilling if equipped with necessary equipment as well as forward-circulation drilling. ◆Strength, five forward speeds and one reverse speed, suitable for drilling a variety of rock, easy to handle accidents happened in hole. ◆Top-drive head is equipped with hand-powered chuck, square driving stem, large stroke, drilling efficiently. ◆Hydraulic feed, big pull and push force easy to make pressure and depression drilling. ◆Hydraulic retracting stroke is 1150mm, easy to lower and hoist drilling tools. ◆Walking device, easy to move and find accurate hole position. ◆Reasonable arrangement, easy to operate, smooth. ◆Can be equipped with special derrick if user needs. |